Hyundai Equus Manuals

Hyundai Azera: Camshaft Position Sensor (CMPS) Description and Operation - Engine Control System - Engine Control/Fuel System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Camshaft Position Sensor (CMPS) Description and Operation

Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and detects the piston position of each cylinder which the CKPS can't detect.
The two CMPS are installed on engine head cover of bank 1 and 2 respectively and uses a target wheel installed on the camshaft. The Cam Position sensor is a hall-effect type sensor. As the target wheel passes the Hall sensor, the magnetic field changes in the sensor. The sensor then switches a signal which creates a square wave.

Crankshaft Position Sensor (CKPS) Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal 1. Turn the ignition switch OFF and disconnect the battery negat ...

Camshaft Position Sensor (CMPS) Specifications
Specification ItemSpecificationOutput Voltage (V)High: 5.0VLow: 0.7VAir Gap (mm)0.5 ~ 1.5 ...

See also:

Rear Package Tray Trim Components and Components Location
Component Location 1. Rear package tray trim ...

Instrument panel illumination
The instrument panel illumination intensity can be adjusted as follows: Ignition switch in the ON position Pushing the control switch up or down The illumination intensity is shown on the ...

A/C Pressure Transducer Repair procedures
Inspection 1. Measure the pressure of high pressure line by measuring voltage output between NO.1 and NO.2 terminals. 2. Inspect the voltage value whether it is sufficient to be regular value ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com