Removal |
[Knock Sensor #1 (Bank 1)] |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the knock sensor connector (A). |
3. |
Remove the intake manifold.
|
4. |
Remove the installation bolt (A), and then remove the sensor from the cylinder block. |
[Knock Sensor #2 (Bank 2)] |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the knock sensor connector (A). |
3. |
Remove the intake manifold.
|
4. |
Remove the installation bolt (A), and then remove the sensor from the cylinder block. |
Installation |
|
|
1. |
Installation is reverse of removal.
|
Description and Operation
Description
The smart cruise control system allows a driver to program
the vehicle to control the speed and following distance detecting the
vehicle ahead without depressing the brake pedal and ...
Heated Oxygen Sensor (HO2S) Troubleshooting
Wave Form
...
Hood Latch Repair procedures
Replacement
1.
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover")
2.
Detach the clips, then remove hood latch cover (A).
3.
Remove the hood latch (A) mounting b ...