Hyundai Azera: Rail Pressure Sensor (RPS) Schematic Diagrams

Rail Pressure Sensor (RPS) Troubleshooting

Signal Waveform ...

Rail Pressure Sensor (RPS) Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ConditionOutput Voltage (V)Idle Approx. 1.21, ...

See also:

Components and Components Location
Components Location [Vehicle Components] 1. Automatic transaxle2. Transaxle Control Module (TCM)3. Shift lever4. Date Linke Connector (DLC) [Transaxle Components] 1. Input speed sensor2. O ...

Seat Heater Repair procedures
Inspection First Seat Heater 1. Check for continuity and measure the resistance between No.1 and NO.4 terminals. No.DescriptionNo.Description1Heater (+)3NTC (-)2NTC (+)4Heater (-) Standar ...

Engine Hanger Repair procedures
Removal and Installation [Front engine hanger] 1. Remove the front engine hanger (A) Tightening torque: 44.1 ~ 53.6N.m (4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft) 2. Install in the reverse ord ...