Hyundai Azera: Variable Intake Solenoid (VIS) Valve Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Control/Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve Repair procedures
| Inspection |
| 1. |
Turn the ignition switch OFF. |
| 2. |
Disconnect the VIS valve connector. |
| 3. |
Measure resistance between the VIS valve terminals 1 and 2. |
| 4. |
Check that the resistance is within the specification.
|
| Removal |
| 1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
| 2. |
Disconnect the variable intake solenoid valve connector (A). |
| 3. |
Disconnect the vacuum hoses (B, C) from the valve. |
| 4. |
Remove the installation nut (D), and then remove the valve.
[Vave 1 (Intake manifold)]
[Vave 2 (Surge tank)]
|
| Installation |
|
|
| 1. |
Installation is reverse of removal.
|
Variable Intake Solenoid (VIS) Valve Schematic Diagrams
Circuit Diagram
...
Fuel Pressure Control Valve (FPCV) Description and Operation
Description
Fuel Pressure Regulator Valve is installed on the high
pressure fuel pump and controls fuel flow flowing into the injectors in
accordance with the ECM signal calculated based on var ...
See also:
Manifold Absolute Pressure Sensor (MAPS) Description and Operation
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density
type sensor and is installed on the surge tank. It senses absolute
pressure of the surge tank and transfers the analog si ...
Parking brake
Applying the parking brake To engage the parking brake, first apply the
foot brake and then depress the parking brake pedal down as far as possible.
In addition it is recommended that when parking ...
Blower Unit Components and Components Location
Component Location
Components
1. Duct Seal2. Duct Case3. Inlet Door4. Intake Actuator5. Inlet Duct Case (A)6. Climate control air filter7. Cluster Ionizer8. Climate control air filter Cover9. Bl ...
Categories
Hyundai Azera Manuals
