Removal |
1. |
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”) |
2. |
Remove the fuel pump service cover (A) in the trunk. |
3. |
Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B). |
4. |
Disconnect the fuel feed tube quick connector (C). |
5. |
Lift the vehicle and support the fuel tank with a jack. |
6. |
Remove the center muffler assembly.
|
7. |
Disconnect the fuel filler hose (A). |
8. |
Disconnect the vapor hose quick-connector (A). |
9. |
Remove the parking brake line (A). |
10. |
Remove the fuel tank band installation nuts (A). |
11. |
Remove the fuel tank after removing the fuel tank band (A) as below. |
Installation |
1. |
Installation is reverse of removal.
|
Engine Coolant Temperature Sensor (ECTS) Specifications
Specification
TemperatureResistance (k?)°C°F-40-4048.14-20-414.13 ~ 16.830325.7920682.31 ~ 2.59401041.15601400.59801760.32
...
Electronic power steering (EPS)
The power steering uses a motor to assist you in steering the vehicle. If the
engine is off or if the power steering system becomes inoperative, the vehicle may
still be steered, but it will require ...
SS-A Solenoid Valve(ON/OFF) Specifications
Specifications
ON/OFF Solenoid Valve(SS-A, SS-B)
? Control type : Normal low type
Control pressure [kpa (kgf/cm?, psi)]490.33(5.0, 71.12) Internal resistance(?)10~11
...