Removal |
1. |
Turn the ignition switch OFF and disconnect the negative (-) battery cable. |
2. |
Disconnect the accelerator position sensor connector (A). |
3. |
Remove the installation nuts (B) and bolt (C), and then remove the accelerator pedal module. |
Installation |
1. |
Installation is reverse of removal.
|
Components and Components Location
Component Location
1. Auto light sensor2. Head lamps3. Lighting switch (Auto)4. Tail lamps5. IPM (Intelligent intergrated Platform Module)
...
Repair procedures
Service Point Target Auto Calibration (SPTAC)
This procedure provides a way to calibrate the camera by
having the service technician align the car to a well lit simulated
straight road target; ...
Yaw-rate and G Sensor Description and Operation
Description
When the vehicle is turning with respect to a vertical axis
the yaw rate sensor detects the yaw rate electroniclly by the vibration
change of plate fork inside the yaw rate sensor.
...