Hyundai Azera: Oil Pump Description and Operation
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Automatic Transaxle System / Hydraulic System / Oil Pump Description and Operation
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Automatic Transaxle System / Hydraulic System / Oil Pump Description and Operation
| Description |
The oil pump is built-in as a single unit with the 26 Brake
chamber. Rotation of the pump builds the hydraulic pressure needed for
the lubrication of the various parts of the transaxle and operation of
the clutch and brakes. The oil also circulates through the torque
converter and the cooler.
Oil Cooler Repair procedures
Removal and Installation
1.
Remove the radiator upper hose and lower hose.
(Refer to Engine Mechanical System - "Radiator Hose")
2.
Remove the cooling fan assembly.
(Refer to Engine Mechani ...
Oil Pump Components and Components Location
Components
1. Reaction shaft support assembly2. Oil pump housing3. Driven gear4. Drive gear5. Oil seal6. Bush-Housing7. Reaction shaft8. Bush- Reaction shaft9. Sleeve10. Bolt
Oil Pump Operatio ...
See also:
Starter Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the engine room under cover.
3.
Remove the starter cover (A).
Tightening torque :
Bolts: 8.8 ~ 13.7 N. ...
Cruise control system
➀ Cruise indicator
➁ SET indicator
The cruise control system allows you to program the vehicle to maintain a constant
speed without depressing the accelerator pedal.
This system is ...
Steering Angle Sensor Description and Operation
Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor
Driven Power Steering) and it sends messages to HECU through CAN
communication line.
The SAS is used to determine turnin ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com