Components |
1. Reaction shaft support assembly 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal | 6. Bush-Housing 7. Reaction shaft 8. Bush- Reaction shaft 9. Sleeve 10. Bolt |
1. Inhale(Oil filter) 2. Inhale(Valve body) 3. Outlet 4. 26/B operation pressure | 5. 35R/C operation pressure 6. Lubrication 7. Line up clutch operation pressure 8. Line up clutch cancellation |
Driver Airbag (DAB) Module and Clock Spring Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Remove the driver airbag module mounting bolts (A).
3.
Remove the wiring fix ...
Vehicle weight
This section will guide you in the proper loading of your vehicle, to keep your
loaded vehicle weight within its design rating capability. Properly loading your
vehicle will provide maximum return o ...
Trunk Lid Assembly Repair procedures
Replacement
•
When removing and installing the trunk lid, an assistant is necessary.
•
Wear gloves to protect hands from injury.
1.
After loosening the mountin ...