Hyundai Azera: Repair procedures
| Adjustment |
| Transaxle Control Module(TCM) Learning |
When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed.
In the following case, TCM learning is required.
| • |
Transaxle assembly replacement |
| • |
TCM replacement |
| • |
TCM upgrading
|
| TCM learning procedure |
| 1. |
ATF temperature: 40~100°C (104~212°F) |
| 2. |
Static learning
Repeat the below shift pattern four times or more with stepping on the brake.
|
| 3. |
Driving learning
Drive the vehicle from a stop in D through all gears 1st,
2nd, 3rd, 4th, 5th and 6th gear while holding the throttle steady at the
specified TPS value (15~25%). |
Description and Operation
Description
Automatic transaxle system relies on various measurement data
to determine the current control status and extrapolate the necessary
compensation values. These values are used to con ...
Schematic Diagrams
Circuit Diagram
...
See also:
Steering Column and Shaft Repair procedures
Replacement
1.
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
2.
Turn the steering wheel so that the front wheels can face straight ahead.
3 ...
Tire chains
Tire chains, if necessary, should be installed on the front wheels.
Be sure that the chains are installed in accordance with the manufacturer's instructions.
To minimize tire and chain wear, do ...
Crash Pad Side Cover Components and Components Location
Component Location
[LH]
1. Crash pad side cover [LH]
[RH]
1. Crash pad side cover [RH]
...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com