Inspection |
1. |
Turn ignition switch OFF. |
2. |
Disconnect the solenoid valve connector. |
3. |
Measure resistance between sensor signal terminal and sensor ground terminal. |
4. |
Check that the resistance is within the specification. |
Removal |
1. |
Remove the automatic transaxle assembly.
(Refer to Automatic Transaxle System - "Automatic Transaxle") |
2. |
Remove the air breeder hose (A). |
3. |
Remove the valve body cover (B).
|
4. |
Remove the bolt (3ea) after disconnecting the solenoid valve connector (B) and the oil temperature sensor connector (A).
|
5. |
Remove the solenoid valve support bracket (B) and the valve body mounting bolt (A-1ea).
|
6. |
Remove the torque converter control solenoid valve (A). |
Installation |
1. |
Installation is the reverse of removal.
|
Keep your garage dry
Do not park your vehicle in a damp, poorly ventilated garage. This creates a
favorable environment for corrosion.
This is particularly true if you wash your vehicle in the garage or drive it
into t ...
Rear Door Window Glass Components and Components Location
Component Location
1. Rear door window glass
...
Catalytic Converter Description and Operation
Description
The catalytic converter of the gasoline engine is a three way
catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and
separates oxygen from the oxides of nitrogen (NOx). ...