Hyundai Azera: 26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation

Torque Converter Control Solenoid Valve (T/CON_VFS) Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Specifications Direct control VFS[26/B] ? Control type : Normal low type Control Pressure [kpa (kgf/cm?, psi)] 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54)Current value(mA)50~850 Internal resi ...

See also:

Repair procedures
On-vehicle Inspection Spark Test 1. Remove the ignition coils. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug socket, remove the spark plug. 3. Install the spark p ...

Surge Tank Repair procedures
Removal and Installation 1. Drain the coolant. (Refer to Cooling System - "Coolant") 2. Remove the air cleaner assembly. (Refer to Intake And Exhaust System - "Air Cleaner") 3. Disconn ...

Keep your garage dry
Do not park your vehicle in a damp, poorly ventilated garage. This creates a favorable environment for corrosion. This is particularly true if you wash your vehicle in the garage or drive it into t ...