Hyundai Equus Manuals

Hyundai Azera: Line Pressure Control Solenoid Valve Description and Operation - Automatic Transaxle Control System - Automatic Transaxle System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Line Pressure Control Solenoid Valve Description and Operation

Description
Line Pressure(L/P) control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line pressure.

26 Brake Control Solenoid Valve(26/B_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Line Pressure Control Solenoid Valve Specifications
Specifications Direct control VFS[LINE Pressure] ? Control type : Normal low type Control Pressure [kpa (kgf/cm?, psi)]500.14 ~ 9.81(5.1~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Inter ...

See also:

Rear Door Latch Components and Components Location
Component Location 1. Rear door latch ...

Input Speed Sensor Troubleshooting
Signal Waveform Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...

Engine Cover Repair procedures
Removal and Installation 1. Remove the engine cover (A).     • Lift up the lower end of engine cover, then left and right alternately. • When installing, confirm that t ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com