Hyundai Azera: Inhibitor Switch Specifications
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch Specifications
| Specifications |
| Power supply (V) | 12 |
| Output type | Combination of output signals |
| P | P-R | R | R-N | N | N-D | D | |
| Signal 1 | 12V | 12V | 0 | 0 | 0 | 0 | 0 |
| Signal 2 | 0 | 12V | 12V | 12V | 0 | 0 | 0 |
| Signal 3 | 0 | 0 | 0 | 12V | 12V | 12V | 0 |
| Signal 4 | 0 | 0 | 0 | 0 | 0 | 0 | 12V |
Inhibitor Switch Description and Operation
Description
Inhibitor Switch monitors the lever's position(PRND) and is used to control gear setting signals. ...
Inhibitor Switch Schematic Diagrams
Circuit Diagram
...
See also:
Non-operational conditions of rear parking assist system
The rear parking assist system may not operate properly when:
1. Moisture is frozen to the sensor. (It will operate normally when the moisture
has been cleared.)
2. The sensor is covered with forei ...
Manifold Absolute Pressure Sensor (MAPS) Description and Operation
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density
type sensor and is installed on the surge tank. It senses absolute
pressure of the surge tank and transfers the analog si ...
Hazard warning flasher
The hazard warning flasher should be used whenever you find it necessary to stop
the car in a hazardous location. When you must make such an emergency stop, always
pull off the road as far as poss ...
Categories
Hyundai Azera Manuals
