Hyundai Azera: Shift Lever Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Lever Repair procedures

Removal

1.	Remove the center console assembly. (Refer to Body - "Console")

2.	Remove the duct (A).

3.	Disconnect sports mode connector (A).

4.	Remove the shift cable (B).

5.	Remove the wiring (A).

6.

Remove the shift lever assembly (B) by removing the bolts (A-4ea).

Tightening torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

7.

Installation is the reverse of removal.

Make sure vehicle does not roll before setting room side shift lever and Automatic Transaxle(AT) side manual control lever to "N" position.

Shift Lever Components and Components Location

Components 1. Shift lever knob2. Shift lever assembly 3. Control cable assembly4. Manual control lever (T/M side) ...

Shift Cable Components and Components Location

Components 1. Shift lever knob2. Shift lever assembly 3. Control cable assembly4. Manual control lever (T/M side) ...

See also:

Rear Door Latch Repair procedures
Replacement 1. Remove the rear door module. (Refer to Rear Door - "Rear Door Module") 2. Disconnect the rear door latch connector (A). 3. Remove the rear door latch assembly (A). 4. I ...

Specifications
Specification Engine & T/MJoint typeMax. permissible angleInnerOuterOuterInnerRAMDA 3.0 MPI A/TBJ#104PTJ#10045°21°RAMDA 3.3 GDI A/TBJ#104PTJ#10045°21° Tightening Torque It ...

Oil Pump Components and Components Location
Components 1. Reaction shaft support assembly2. Oil pump housing3. Driven gear4. Drive gear5. Oil seal6. Bush-Housing7. Reaction shaft8. Bush- Reaction shaft9. Sleeve10. Bolt Oil Pump Operatio ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com