Removal |
1. |
Remove the center console assembly.
|
2. |
Remove the duct (A). |
3. |
Remove the control cable (B). |
4. |
Remove the control cable assembly in the vehicle after removing the nuts (B) and the retainer (A).
|
5. |
Remove the nut (C). |
6. |
Remove the cable (B) from the bracket (A) at transaxle assembly side.
(Refer to Automatic Transaxle System - "Automatic Transaxle") |
7. |
Remove the control cable inside of cab.
|
Installation |
1. |
Installation is the reverse of removal.
|
Adjustment |
Adjusting method for T/M control cable |
1. |
Make sure vehicle does not roll before setting room side
shift lever and Automatic Transaxle(AT) side manual control lever to "N"
position. |
2. |
Connect room side shift lever and control cable. |
3. |
Push cable to "F" direction shown to eliminate FREE PLAY. |
4. |
Tighten adjusting nut (A).
|
5. |
After adjusting, check to be sure that this part operates as
designed at each range of Automatic Transaxle(AT) side corresponding to
each position of room lever. |
Clock/Calendar Setting
Clock Setting
Press the key
Select [Clock/ Calendar]
Select [Clock Settings]
Use ,
keys to select the Hour, Minutes and
AM/PM setting and use ,
keys to change settings.
Calendar ...
Crankshaft Position Sensor (CKPS) Schematic Diagrams
Circuit Diagram
...
Before entering vehicle
Be sure that all windows, outside mirror(s), and outside lights are clean.
Check the condition of the tires.
Check under the vehicle for any sign of leaks.
Be sure there are no obstacles behi ...