Replacement |
1. |
Remove the rear wheel & tire (A).
|
2. |
Loosen the bolt and then remove the variable damper bracket (A). |
3. |
Loosen the bolt & nut and then disconnect the shock absorber (A) with the rear axle.
|
4. |
Loosen the shock absorber mounting bolts (A).
|
5. |
Installation is the reverse of removal. |
Inspection |
1. |
Check the rubber parts for wear and deterioration. |
2. |
Compress and extend the piston rod(A) and check that there is no abnormal resistance or unusual sound during operation. |
1. |
Fully extend the piston rod |
2. |
Drill a hole on the (A) section to remove gas form the cylinder.
|
Engine Control Module (ECM) Schematic Diagrams
ECM Terminal And Input/Output signal
ECM Terminal Function
Connector [ELG-A]
Pin No.DescriptionConnected to1-?2-?3-?4Immobilizer Lamp control outputImmobilizer Lamp [Without Button Engine Sta ...
Specifications
Specifications
ItemsSpecificationsRated voltageDC +5VLoadMax. 1mA (When head lamp lighting)Illuminations50 LUX1.42 ± 0.31V50 LUX3.84 ± 0.84V
...
Front Seat Assembly Components and Components Location
Component Location
1. Front seat assembly
...