Replacement |
1. |
Remove the rear wheel & tire (A).
|
2. |
Remove the rear shock absorber.
(Refer to Rear Suspension System - “Rear Shock Absorber”) |
3. |
Remove the sprit pin and castle nut and then disconnect the rear assist arm (A) from the rear axle.
|
4. |
Loosen the bolt & nut and then remove the rear assist arm (A) with the sub frame.
|
5. |
Installation is the reverse of removal. |
6. |
Check the alignment.
(Refer to Tires/Wheels - “Alignment”) |
Inspection |
1. |
Check the bushing for wear and deterioration. |
2. |
Check the rear assist arm for deformation. |
3. |
Check ball joint for damage. |
4. |
Check for the all bolts and nuts. |
Rear Upper Arm Repair procedures
Removal
1.
Remove the rear wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub bolts when ...
Front Seat Shield Inner Cover Components and Components Location
Component Location
1. Front seat shield inner cover
...
Front Wiper Motor Repair procedures
Removal
1.
Loosen the windshield wiper arm nut (B) after removing a wiper cap (A).
2.
Remove the windshield wiper arm and blade.
3.
If necessary, release the wiper blade fixing clip by pul ...