Replacement |
When the receiver first arrives for replacement:
|
It is important to make sure that the correct receiver is
used to replace the faulty part i.e. it must be High Line (95800-3M100)
in order to have the correct inflation warning thresholds set. |
1. |
Disconnect vehicle battery. |
2. |
Remove the rear bumper.
|
3. |
Remove faulty part and fit bracket assembly to new part. |
4. |
Secure new part to vehicle and fit connector. |
5. |
Re-connect battery and turn Ignition on.
Vechicle Name Writing
VIN Writing |
Description and Operation
Function Of Safety Power Window
When driver door power window auto-up switch is operated, safety function is activated.
1.
Safety function condition
When detect the force of 100N (using the 10N/ ...
Antenna Coil Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Disconnect the 6P connector (B) of the coil ante ...
Horn
To sound the horn, press the area indicated by the horn symbol on your steering
wheel (see illustration). The horn will operate only when this area is pressed.
Check the horn regularly to be sur ...