Removal |
1. |
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. |
2. |
Turn the steering wheel so that the front wheels can face straight ahead. |
3. |
Remove the airbag module.
|
4. |
Disconnect the lock nut (A) & connector (B) and then
remove the steering wheel by using special service tools. (09561-11001)
|
5. |
Installation is the reverse of the removal. |
Disaseembly |
1. |
Loosen the screw(6ea) and remove the lower cover (A) from the steering wheel body. |
2. |
Disconnect the Wiring (A). |
3. |
Loosen the screw(2ea) and remove the remote control assembly (A) from the steering wheel body. |
4. |
Installation is the reverse of the removal. |
Water Pipe Repair procedures
Removal and Installation
1.
Remove the delivery pipe and injector assembly.
(Refer to Fuel System - "Delivery Pipe")
2.
Remove the water temperature control assembly.
(Refer to Cooling Sys ...
Seat belt restraint system
Seat belts are designed to bear upon the bony structure of the body, and should
be worn low across the front of the pelvis or the pelvis, chest and shoulders, as
applicable; wearing the lap section ...
Components and Components Location
Component Location
1. Fuel filler door open switch2. Fuel filler door release actuator
...