System Circuit Diagram |
Housing | Pin | Function | Wire color |
Pad | A | GND | Back |
B | HEATER | Yellow | |
C | NTC+ | Back / Yellow | |
D | NTC- | Back | |
Remote control | A | GND | Back |
B | BAT | Red | |
C | LED | Green | |
D | SWITCH | White |
Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for
the first 600 miles (1,000 km) you may add to the performance, economy and life
of your vehicle.
Do not race the e ...
Rain Sensor Repair procedures
Inspection
Rain Sensing Wiper
1.
In IGN2 ON state, if auto switch input (LIN communication) is
ON then both wiper low relay and wiper high relay outputs are
controlled by the rain sensor inpu ...
Water Pipe Repair procedures
Removal and Installation
1.
Remove the delivery pipe and injector assembly.
(Refer to Fuel System - "Delivery Pipe")
2.
Remove the water temperature control assembly.
(Refer to Cooling Sys ...