Hyundai Azera: Front Impact Sensor (FIS) Description and Operation
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and Operation
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and Operation
| Description |
The front impact sensor (FIS) is installed in the Front End
Module (FEM). They are remote sensors that detect acceleration due to a
collision at its mounting location. The primary purpose of the Front
Impact Sensor (FIS) is to provide an indication of a collision. The
Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
SRS Control Module (SRSCM) Repair procedures
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Remove the floor console.
(Ref ...
Front Impact Sensor (FIS) Components and Components Location
Components
...
See also:
Troubleshooting
Troubleshooting
SymptomSuspect areaEngine will not start or stuggle to startVapor hose damaged or disconnectedEngine stuggle to startMalfunction of the Purge Control Solenoid ValveRough idle or e ...
Master Cylinder Components and Components Location
Components
1. Reservoir cap2. Reservoir3. Grommet4. Master cylinder
...
Engine Coolant Temperature Sensor (ECTS) Schematic Diagrams
Circuit Diagram
...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com