Your mirror will automatically dim upon detecting glare from the vehicles traveling behind you. The autodimming function can be controlled by the Dimming ON/OFF button:
1. Pressing and holding the button for 3 seconds turns the autodimming function
OFF which is indicated by the green Status Indicator LED turning off.
2. Pressing and holding the button for 3 seconds again turns the auto-dimming function
ON which is indicated by the green Status Indicator LED turning on.
The mirror defaults to the ON position each time the vehicle is started.
Z-Nav™ Compass Display
The NVS™ Mirror in your vehicle is also equipped with a Z-Nav™ Compass that shows the vehicle Compass heading in the Display Window using the 8 basic cardinal headings (N, NE, E, SE, etc.).
Programming
To train most devices, follow these instructions:
1. For first-time programming, press and hold the two outside buttons (
, ), HomeLink® Channel 1 and Channel
3, until the indicator light begins ...
Start/Stop Button Components and Components Location
Component
...
Thermostat Troubleshooting
Troubleshooting
SymptomsPossible CausesRemedyCoolant leakage
•
From the thermostat gasket
Check the mounting bolts
•
Check the torque of the mounting bolts
•
Retighten the bolts an ...