Removal |
1. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
2. |
Left side - Remove the seat belt lower anchor cover (A).
After loosening the mounting bolt, then remove the seat belt lower
anchor (B).
Right side - To remove the seat belt anchor pretensioner (C),
keep on pushing the lock pin (A) as arrow direction. And then remove
the seat belt after pushing the lock pin (B). |
3. |
Remove the door scuff trim.
|
4. |
Remove the center pillar trim.
|
5. |
Remove the upper anchor bolt. |
6. |
Disconnect the seat belt pretensioner connector (C). |
7. |
Loosen the seat belt pretensioner mounting bolts (A,B) and remove the seat belt pretensioner. |
Installation |
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least three minutes. |
3. |
Install the seat belt pretensioner with a bolts (A,B).
|
4. |
Connect the seat belt pretensioner (BPT) connector (A). |
5. |
Install the upper anchor bolts.
|
6. |
Install the center pillar trim.
|
7. |
Install the door scuff trim.
|
8. |
Left side - Install the lower anchor bolts.
Right side - Insert the seat belt to the anchor pretensioner (A).
|
9. |
Reconnect the battery negative cable. |
10. |
After installing the seat belt pretensioner, confirm proper system operation:
|
Binding arbitration (U.S.A Only)
Any claim or dispute you may have related to your vehicle's warranty or the duties
contemplated under the warranty, including claims related to the refund or partial
refund of your vehicle's ...
Description and Operation
Description
The immobilizer system will disable the vehicle unless the
proper ignition key is used, in addition to the currently available
anti-theft systems such as car alarms, the immobilizer ...
Rear Back Armrest Cup Holder Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...