Removal |
1. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
2. |
To remove the seat belt anchor pretensioner (C), keep on
pushing the lock pin (A) as arrow direction. And then remove the seat
belt after pushing the lock pin (B). |
3. |
Remove the door scuff trim.
|
4. |
Remove the center pillar trim.
|
5. |
Disconnect the anchor pretensioner connector (A). |
6. |
Loosen the anchor pretensioner mounting bolt (B) and remove the anchor pretensioner. |
Installation |
1. |
Remove ignition key from the vehicle. |
2. |
Disconnect the negative (-) cable from battery and wait for at least three minutes. |
3. |
Install the anchor pretensioner with a bolt.
|
4. |
Connect the anchor pretensioner connector. |
5. |
Install the center pillar trim.
|
6. |
Install the door scuff trim.
|
7. |
Insert the seat belt to the anchor pretensioner (A).
|
8. |
Reconnect the battery negative cable. |
9. |
After installing the anchor pretensioner, confirm proper system operation:
|
Components and Components Location
Components
1. Front seat belt pretensioner2. Height adjuster3. Rear seat belt [RH]4. Rear seat belt [Center]5. Rear seat belt [LH]6. Rear seat belt buckle [LH]
...
Scheduled maintenance service
Follow Normal Maintenance Schedule if the vehicle is usually operated where none
of the following conditions apply. If any of the following conditions apply, follow
Maintenance Under Severe Usage Co ...
Engine oil and filter
The engine oil and filter should be changed at the intervals specified in the
maintenance schedule. If the car is being driven in severe conditions, more frequent
oil and filter changes are required ...