Removal |
1. |
Disconnect the brake fiuid level switch connector, and remove the reservoir cap. |
2. |
Remove the brake fluid from the master cylinder reservior with a syringe.
|
3. |
Remove the wheel & tire. |
4. |
Disconnect the brake tube by loosening the tube flare nut (B).
Front
Rear |
5. |
Remove the brake hose clip (A). |
6. |
Disconnect the brake hose from the brake caliper by loosening the bolt (A).
Front
Rear |
Inspection |
1. |
Check the brake tubes for cracks, crimps and corrosion. |
2. |
Check the brake hoses for cracks, damage and fluid leakage. |
3. |
Check the brake tube flare nuts for damage and fluid leakage. |
4. |
Check brake hose mounting bracket for crack or deformation. |
Installation |
1. |
Installation is the reverse of removal.
|
2. |
After installation, bleed the brake system.
(Refer to Brake system bleeding) |
3. |
Check the spilled brake oil. |
Audio CD Mode Menu
If you press the key, you will
have access to the Repeat, Shuffle, List and Info features.
Repeat
Press the key
Select
Repeat :Repeats the current track.
Shuffle
Press the key
Se ...
Rear Door Trim Components and Components Location
Component Location
1. Rear door trim
...
EBD(Electronic Brake-force Distribution) Description and Operation
Operation
The EBD system (Electronic Brake force Distribution) as a
sub-system of the ABS system is to control the maximum braking
effectiveness by the rear wheels.
It further utilizes the e ...