Removal |
1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable. |
2. |
Remove the crash pad lower panel.
|
3. |
Remove the parking brake cable mounting nuts (A). |
4. |
Remove the parking brake cable adjusting nut(A) and the fixing clip(B), and then remove the parking brake pedal. |
5. |
Remove the floor console.
|
6. |
Remove the shift lever assembly.
|
7. |
Remove the parking brake cable (B) after removing the cable retainer (A). |
8. |
Remove the parking brake cable fixing clip (A) and bolts. And then remove the front parking brake cable. |
9. |
Raise the vehicle, and make sure it is securely supported. |
10. |
Remove the rear wheel & tire. |
11. |
Remove the parking brake cable (B) after removing the fixing clip (A). |
12. |
Loosen the parking brake cable bracket bolts and remove the rear parking brake cable. |
13. |
Installation is reverse of removal. |
Cylinder Head Components and Components Location
Components
1. RH Cylinder head2. RH Cylinder head gasket3. LH Cylinder head4. LH Cylinder head gasket5. Cylinder block
1. Camshaft bearing cap 2. Camshaft thrust bearing cap 3. RH Exhaust ca ...
Steering Column Shroud Panel Components and Components Location
Component Location
1. Steering column shroud panel
...
Air cleaner
...