Removal |
1. |
Turn the ignition switch OFF. |
2. |
Remove the air duct (B) and air cleaner assembly (A). |
3. |
Remove the connector and then arrange the wiring harness (A). |
4. |
Remove the brake fluid from the master cylinder reservoir with a syringe.
|
5. |
Loosen the flare nuts and then remove the brake tube (A).
|
6. |
Pull up the lock of the HECU connector (A) and then disconnect the connector. |
7. |
Disconnect the brake tubes from the HECU by unlocking the nuts counterclockwise with a spanner.
|
8. |
Loosen the HECU bracket bolts (A) and then remove HECU and bracket.
|
9. |
Remove the bolts and then remove the bracket from HECU.
|
Installation |
1. |
Installation is the reverse of removal. |
2. |
Tighten the HECU mounting bolts and nuts to the specified torque. |
3. |
After installation, bleed the brake system.
(Refer to Brake system - "Bleeding") |
Starting Mode
Press the key to display the Setup
screen.
You can select and control options related to [Display], [Sound], [Clock / Calendar],
[Phone] and [System].
✽ NOTICE
Once settings have been c ...
Center Muffler Components and Components Location
Components
1. Catalytic converter & center muffler assembly
...
Automatic-dimming function
Your mirror will automatically dim upon detecting glare from the vehicles traveling
behind you. The autodimming function can be controlled by the Dimming ON/OFF button:
1. Pressing and holding the b ...