Hyundai Azera: Front Wheel Speed Sensor Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Brake System / ESC(Electronic Stability Control) System / Front Wheel Speed Sensor Repair procedures

Removal

1.

Remove the front wheel and tire.

Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.

Remove the front wheel speed sensor mounting bolt (A).

Tightening torque:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 7.6 lb-ft)

3.	Remove the front wheel guard .

4.	Remove the front wheel speed sensor cable mounting bolt.

5.	Disconnect the front wheel speed sensor connector, then remove the front wheel speed sensor.

6.	Installation is the reverse of removal.

Front Wheel Speed Sensor Components and Components Location

Components 1. Front wheel speed sensor2. Front wheel speed sensor connector ...

Rear Wheel Speed Sensor Components and Components Location

Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor cable ...

See also:

26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation
Description 26 brake control solenoid valve(26/B) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 brake. ...

Side repeater light bulb replacement
If the light bulb does not operate, have the vehicle checked by an authorized HYUNDAI dealer. ...

Starter Components and Components Location
Component 1 . Front housing2. Planet gear shaft assembly3 . Lever4 . Lever packing5 . Starter solenoid assembly6 . Packing7 . Planet gear 8 . Shield9 . Armature assembly10 . York assembly11 . Br ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com