Removal |
1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable. |
2. |
Remove the floor console.
|
3. |
Disconnect the yaw rate & lateral G sensor connector (A). |
4. |
Remove the mounting bolts (B).
|
5. |
Installation is the reverse of removal. |
Ambient Sensor Description and Operation
Description
1.
The ambient temperature sensor is located at the front of the
condenser and detects ambient air temperature. It is a negative type
thermistor resistance will increase with lower ...
Front Door Side Weatherstrip Repair procedures
Replacement
1.
Detach the clips, then remove the front door side weatherstrip (A).
2.
Installation is the reverse of removal.
•
Replace any damaged clips.
...
Specifications
Specifications
DescriptionSpecificationsLimitGeneralTypeV-type, DOHCNumber of cylinders6Bore92mm(3.6220in.)Stroke83.8mm(3.2992in.)Total displacement3,342cc(203.94cu.in.)Compression ratio11.5 : 1F ...