Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Recover the refrigerant with a recovery/ recycling/ charging station. |
3. |
When the engine is cool, drain the engine coolant from the radiator.
|
4. |
Remove the expansion valve cover (A). |
5. |
Remove the bolts (A) and the expansion valve (B) from the evaporator core.
Plug or cap the lines immediately after disconnecting them to avoid moisture and dust contamination.
|
6. |
Disconnect the inlet (C) and outlet (D) heater hoses from the heater unit.
|
7. |
Remove the crash pad.
|
8. |
Remove the cowl cross member.
|
9. |
Loosen the heater & blower assembly mounting bolts and then remove the heater & blower assembly (A). |
10. |
Remove the blower unit (B) from heater unit after loosening 3 screws. |
11. |
Installation is the reverse order of removal, and note these items :
|
Relay Box (Passenger Compartment) Description and Operation
Description
Auto cut system of dark current
1.
Description : It cuts automatically power to the load to reduce parastic current draw.
2.
IPM had 3 modes, "Normal Mode", "Sleep Mode", "Power ...
Curtain air bag
Curtain air bags are located along both sides of the roof rails above the front
and rear doors.
They are designed to help protect the heads of the front seat occupants and the
rear outboard seat ...
Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band
across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left
on the tire. Replace the tire when t ...