Hyundai Equus Manuals

Hyundai Azera: Height Adjust Repair procedures - Front Seat Belt - Body (Interior and Exterior) - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Height Adjust Repair procedures

Replacement
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
2.
After loosening the bolts, then remove the height adjustor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Installation is the reverse of removal.
   
Replace any damaged clips.
Make sure the connector is plugged in properly.
Height Adjust Components and Components Location
Component Location 1. Height adjust ...

Front Seat Belt Buckle Components and Components Location
Component Location 1. Front seat belt buckle ...

See also:

Injector Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. 4. Check that the resistance is within t ...

SCAN
Press the key to scan all channels with superior reception for 5 seconds each. Once scan is complete, the previously played channel will be restored. During Scan, pressing the key again will can ...

Rear Door Latch Repair procedures
Replacement 1. Remove the rear door module. (Refer to Rear Door - "Rear Door Module") 2. Disconnect the rear door latch connector (A). 3. Remove the rear door latch assembly (A). 4. I ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com