To turn on the high beam headlights, push the lever away from you. Pull it back for low beams.
The high beam indicator will light when the headlight high beams are switched on.
To prevent the battery from being discharged, do not leave the lights on for a prolonged time while the engine is not running.
To flash the headlights, pull the lever towards you. It will return to the normal (low beam) position when released. The headlight switch does not need to be on to use the flashing feature.
WARNING
Do not use high beam when there are surrounding vehicles. Using high beam could obstruct the other driver's vision.
Fuel Pressure Control Valve (FPCV) Description and Operation
Description
Fuel Pressure Regulator Valve is installed on the high
pressure fuel pump and controls fuel flow flowing into the injectors in
accordance with the ECM signal calculated based on var ...
Line Pressure Control Solenoid Valve Description and Operation
Description
Line Pressure(L/P) control solenoid valve is attached to the
valve body. This variable force solenoid valve directly controls the
hydraulic pressure inside the line pressure. ...
Instrument Cluster Repair procedures
Inspection
Speedometer
1.
Adjust the pressure of the tires to the specified level.
2.
Drive the vehicle onto a speedometer tester. Use wheel chocks (A) as appropriate.
3.
Check if the spe ...