Hyundai Equus Manuals

Hyundai Azera: Hood Assembly Repair procedures - Hood - Body (Interior and Exterior) - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Hood Assembly Repair procedures

Replacement
   
When removing and installing the hood, an assistant is necessary.
Be careful not to damage the hood and body.
When removing the clips, use a clip remover.
1.
Using a screwdriver, lift the socket clips (A) up slightly on both ends of the lifter (B).

2.
After loosening the hood hinge (A) mounting bolts, remove the hood panel (B).

Tightening torque :
21.6~26.5 N.m (2.2~2.7 kgf.m, 15.9~19.5 lb-ft)

3.
Installation is the reverse of removal.
   
Make sure the hood locks/unlocks and opens/closes properly.
Adjust the hood alignment.
Hood Assembly Components and Components Location
Component Location 1. Hood assembly ...

Hood Insulator Pad Repair procedures
Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).     • Be careful not to scratch the hood panel. 2. Installation is the ...

See also:

Components and Components Location
Component Location 1. Front view camera2. Back view camera3. Parking guide system (PGS)4. LCD monitor5. Front view camera switch ...

SRS Control Module (SRSCM) Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the floor console. (Ref ...

Description and Operation
Description You can up & down rear curtain automatically by pressing the rear curtain switch. Rear curtain protect passenger from a direct ray of light by covering rear glass.   ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com