Hyundai Azera: Hood Latch Components and Components Location

Hood Latch Release Handle Repair procedures

Replacement 1. Using a screwdriver or remover, remove the hood release handle (A).     • Use a 6mm hex bit to press the center until the handle easily pulls off the post. ...

Hood Latch Repair procedures

Replacement 1. Remove the front bumper cover. (Refer to Front Bumper - "Front Bumper Cover") 2. Detach the clips, then remove hood latch cover (A). 3. Remove the hood latch (A) mounting b ...

See also:

ICM (Integrated Circuit Module) Relay Box Components and Components Location
Component Input/Output Specification No.ConnectorNo.Connector1 -11 -2 -12 -3Burglar horn13 -4 -14 -5Engine room box(Horn 15A fuse)15GND6IPM(BCM : Burglar alarm h ...

Barometric Pressure Sensor (BPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the BPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn ...

Specifications
Specifications DescriptionSpecificationsLimitGeneralTypeV-type, DOHCNumber of cylinders6Bore92mm(3.6220in.)Stroke83.8mm(3.2992in.)Total displacement3,342cc(203.94cu.in.)Compression ratio11.5 : 1F ...