Hyundai Azera: Hood Latch Release Handle Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Repair procedures

Replacement

1.

Using a screwdriver or remover, remove the hood release handle (A).

•	Use a 6mm hex bit to press the center until the handle easily pulls off the post.

2.

Installation is the reverse of removal.

•	Make sure the hood latch cable is connected properly.

•	Make sure the hood locks/unlocks and opens/closes properly.

Hood Latch Release Handle Components and Components Location

Component Location 1. Hood latch release handle ...

Hood Latch Components and Components Location

Component Location 1. Hood latch ...

See also:

Saving Presets
After selecting the channel Press and hold the desired preset ~ key. A 'beep' will sound and the channel is saved to the selected preset button. ...

Do not use methanol
Fuels containing methanol (wood alcohol) should not be used in your vehicle. This type of fuel can reduce vehicle performance and damage components of the fuel system. ✽ NOTICE Your New Veh ...

Air bag warning indicator
Air bag warning light The purpose of the air bag warning light in your instrument panel is to alert you of a potential problem with your air bag - Supplemental Restraint System (SRS). When the ig ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com