Replacement |
1. |
Remove the hood weatherstrip (A). |
2. |
Installation is the reverse of removal. |
Opening the hood
Open the hood after turning off the engine on a flat surface, move the shift
lever to the P(Park) position and set the parking brake.
1. Pull the release lever to unlatch the hood. The hood shou ...
Filter replacement
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner element.
1. Loosen the air cleaner cover attaching clips and open the cover ...
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 3 and 4.
4.
Check that the resistance is within the speci ...