Inspection |
1. |
There should be continuity between the No.18 and No.17
terminals when power and ground are connected to the No.16 and No.17
terminals. |
2. |
There should be no continuity between the No.18 and No.17 terminals when power is disconnected. |
1. |
There should be continuity between the No.8 and No.3
terminals when power and ground are connected to the No.5 and No.6
terminals. |
2. |
There should be no continuity between the No.8 and No.3 terminals when power is disconnected. |
1. |
There should be continuity between the No.1 and No.12
terminals when power and ground are connected to the No.2 and No.11
terminals. |
2. |
There should be no continuity between the No.1 and No.12 terminals when power is disconnected. |
Interior care
Interior general precautions
Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and
air freshener from contacting the interior parts because they may cause damage or
discolor ...
Cylinder Block Components and Components Location
Components
1. Piston ring2. Piston3. Connecting rod4. Connecting rod upper bearing5. Piston pin6. Connecting rod lower bearing7. Connecting rod bearing cap8. Baffle plate9. Upper oil pan10. Cylin ...
Repair procedures
On-vehicle Inspection
•
Check that the battery cables are connected to the correct terminals.
•
Disconnect the battery cables when the battery is given a quick charge ...