Description |
1. |
In-car air temperature sensor is located at the lower crash pad. |
2. |
The sensor contains a thermistor which measures the
temperature of the cabin. The signal, determined by the resistance value
which changes in accordance with perceived cabin temperature, is
delivered to heater control unit and according to this signal the
control unit regulates in-car temperature to intended value. |
Transaxle Control Module (TCM) Schematic Diagrams
TCM connector and terminal function
TCM Terminal Function
Connector [ELG-A]
PinDescriptionPinDescription1?51?2?52?3?53?4?54Sports mode down switch5?55?6?56?7?57?8?58?9CCP CAN(HIGH)59?10CAN Commu ...
Microphone Repair procedures
Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the roof trim.
(Refer to Body - "Roof Trim Assembly")
3.
Remove the handsfree mic (A) after disconnect the connector f ...
Front Seat Frame Assembly Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...