Removal |
1. |
Turn the ignition switch off and disconnect the battery negative (-) cable. |
2. |
Disconnect the injector drive box (IDB) connector (A). |
3. |
Remove the air cleaner assembly.
|
4. |
Remove the main wiring harness (B) after removing the nut (A). |
5. |
Remove the IDB bracket assembly (B) after removing the bolts (A). |
6. |
After removing the installation bolts (A), remove the IDB from the bracket. |
Installation |
1. |
Installation is the reverse of removal.
|
Pairing through [PHONE] Setup
Press the key
Select [Phone]
Select [Pair Phone]
Select
TUNE knob
1.The following steps are the same as those described in the section "When No
Devices have been Paired&qu ...
Center Muffler Components and Components Location
Components
1. Catalytic converter & center muffler assembly
...
Components and Components Location
Component Location (1)
1. Buzzer2. RF receiver3. Smart key unit4. Interior antenna 15. Interior antenna 26. Trunk antenna7. Bumper antenna
Component Location (2)
1. Start Stop Button (SSB)2 ...