Inspection |
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the IATS connector. |
3. |
Measure resistance between the IATS terminals 3 and 4. |
4. |
Check that the resistance is within the specification.
|
Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the intake air temperature sensor connector (A). |
3. |
Remove the installation bolts (B), and then vertically remove the sensor from the air cleaner assembly. |
Installation |
|
|
1. |
Installation is reverse of removal.
|
Check battery and cables
Winter puts additional burdens on the battery system. Visually inspect the battery
and cables as described in section 7. The level of charge in your battery can be
checked by an authorized HYUNDAI d ...
Front Fog Lamps Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
3.
Disconnect the front fog lamp connector.
4.
Replace the ...
Battery
...