Description |
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using the specified tester. If the
circuit resistance is measured with a tester, accidental airbag
deployment will result in serious personal injury. |
General Information
General Service Information
Protection Of The Vehicle
Always be sure to cover fenders, seats, and floor areas before starting work.
The support rod must be inserted into the ...
Air Cleaner Repair procedures
Removal and Installation
1.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
2.
Remove the engine cover.
3.
Remove the air duct (A).
4.
Remove the air cleaner asse ...
Hands Free Switch Repair procedures
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the steering wheel.
(Refer to Steering System - "Steering Column and Shaft")
3.
Remove the cover (A) after loosening scre ...