Hyundai Azera: Master Cylinder Components and Components Location

Brake Booster Repair procedures

Brake Booster Operating Test For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depress ...

Master Cylinder Repair procedures

Removal 1. Turm ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air duct (B) and air cleaner assembly (A). 3. Disconnect the brake fluid level switch conne ...

See also:

Windshield Deicer Switch Repair procedures
Inspection 1. The windshield deicer switch inputs can be checked using the GDS. 2. To check the input value of windshield deicer switch, select option "IPM". 3. Select option "Current Data ...

Repair procedures
Starter Circuit Troubleshooting     The battery must be in good condition and fully charged. 1. Disconnect the injector connectors. 2. With the shift lever in N or P (A/T) ...

Front Muffler Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the engine room under cover. 3. Disconnect the heated oxygen sensor (HO2S) connector. (Refer to Fuel Sys ...