Removal |
1. |
Remove the rear roof trim.
|
2. |
Disconnect the Connector(A) and cables (B) from the roof antenna. |
3. |
Remove the roof antenna after removing a nut(A). |
Installation |
1. |
Install the roof antenna. |
2. |
Connect the GPS cable. |
3. |
Install the nut. |
4. |
Install the rear roof trim.
|
Fuel Filler Cap Description and Operation
Description
A ratchet tightening device on the threaded fuel filler cap
reduces the chances of incorrect installation, which would seal the fuel
filler. After the gasket on the fuel filler cap ...
Head Lamps Description and Operation
HID Head Lamp
1.
Bulb
(1)
Elements
Xenon gas: Xenon gas activates the initial reaction for rapid illuminating.
Molybdenum electrode: anode arcing
Metal halide salts: color composing component ...
License Lamp Repair procedures
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the license lamp (A) with loosening a screw.
Installation
1.
Install the bulb.
2.
Install the license lamp lens. ...