Removal and Installation |
1. |
Remove the radiator upper hose and lower hose.
|
2. |
Remove the cooling fan assembly.
|
3. |
Disconnect the over flow hose.
|
4. |
Disconnect the hose (B) after removing the automatic transaxle fluid cooler hose clamp (A). |
5. |
Remove the radiator mounting brackets (A).
|
6. |
Separate the condenser from the radiator and then pull radiator (A) up and remove it from engine room. |
7. |
Installation is in the reverse order of removal. |
8. |
Fill the radiator with coolant and check for leaks.
|
Inspection |
1. |
Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. |
2. |
Apply a pressure of 93.16 ~ 122.58kpa (0.95 ~ 1.25kg/cm?, 13.51 ~ 17.78psi). |
3. |
Check for a drop in pressure. |
4. |
If the pressure drops, replace the cap. |
1. |
Wait until engine is cool, then carefully remove the radiator
cap and fill the radiator with engine coolant, then install it on the
pressure tester. |
2. |
Apply a pressure tester to the radiator and apply a pressure of 93.16 ~ 122.58kpa (0.95 ~ 1.25kg/cm?, 13.51 ~ 17.78psi). |
3. |
Inspect for engine coolant leaks and a drop in pressure. |
4. |
Remove the tester and reinstall the radiator cap.
|
Engine Oil Repair procedures
Replacement
•
Prolonged and repeated contact with mineral oil will result
in the removal of natural fats from the skin, leading to dryness,
irritation and dermatitis. I ...
Roof Trim Assembly Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Put on gloves to protect your hands.
1.
Re ...
Schematic Diagrams
Trouble Symptom Charts
Component Parts And Function Outline
Component partFunctionCruise Control SwitchInput the set speed and distance to the SCC ECU.Instrument ClusterDisplay various information ...