Removal and Installation |
1. |
Remove the water pipe.
(Refer to Cooling System - "Water Pipe") |
2. |
Wait for 5 minutes after loosening the oil filter cap to drain well the oil in the oil filter. |
3. |
Remove the oil filter body (A).
|
4. |
Installation is in the reverse order of removal. |
Ignition Coil Components and Components Location
Components
1. Condensor2. Bracket3. Ignition coil4. Ignition coil harness
...
Cylinder Head Repair procedures
Removal
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damaging the cylinder head, wait until the engine
coolant temperature drops below normal ...
SRS Control Module (SRSCM) Components and Components Location
Components
...