Removal |
[Lower oil pan] |
1. |
Drain the engine oil.
(Refer to Lubrication System - "Engine Oil") |
2. |
Remove the front muffler.
(Refer to Intake And Exhaust System - "Front Muffler") |
3. |
Remove the lower oil pan (A).
Insert the blade of SST(09215-3C000) between the upper oil
pan and lower oil pan. Cut off applied sealer and remove the lower oil
pan.
|
[Upper oil pan] |
1. |
Remove the engine assembly from the vehicle.
(Refer to Engine And Transmission Assembly - "Engine And Transmission Assembly") |
2. |
Attach the engine to engine stand for disassembly. |
3. |
Remove the timing chain.
(Refer to Timing System - "Timing Chain") |
4. |
Remove the lower oil pan.
(Refer to Lubrication System - "Oil Pan") |
5. |
Remove the oil pump.
(Refer to Lubrication System - "Oil Pump") |
6. |
Remove the LH/RH exhaust manifold stays.
(Refer to Intake And Exhaust System - "Exhaust Manifold") |
7. |
Remove the upper oil pan (A).
Insert the blade of SST(09215-3C000) between the upper oil
pan and sylinder block. Cut off applied sealer and remove the upper oil
pan. |
Installation |
[Lower oil pan] |
1. |
Install the lower oil pan (A).
|
2. |
After assembly, wait at least 30 minutes before filling the engine with oil. |
3. |
Install the front muffler.
(Refer to Intake And Exhaust System - "Front Muffler") |
[Upper oil pan] |
1. |
Install the upper oil pan.
|
2. |
Install the other parts reverse order of removal. |
Yaw-rate and G Sensor Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console.
(Refer the Body - "Floor console")
3.
Disconnect the yaw rate & latera ...
Start/Stop Button Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the AVN head unit.
(Refer to AVN System - "AVN Head Unit")
3.
Disconnect the start/stop button connector. Push the hook ...
Fuel Tank Pressure Sensor (FTPS) Specifications
Specification
Pressure [kPa (kgf/cm?, psi)]Output Voltage (V)-6.67 (-0.06, -0.97)0.502.5+6.67 (0.068, 0.97)4.5
...