Removal |
1. |
Remove the lower oil pan.
(Refer to Lubrication System - "Oil Pan") |
2. |
Remove the oil pump chain cover (A).
|
3. |
Remove the bolt (A) and then seperate the chain with sprocket from the oil pump.
|
4. |
Remove the oil pump (A).
|
5. |
Install in the reverse order of removal. |
Installation |
1. |
Install the oil pump (A).
|
2. |
Install the oil pump sprocket and the oil pump chain on the oil pump, and tighten the sprocket bolt (A).
|
3. |
Install the oil pump chain cover (A).
|
4. |
Install the lower oil pan.
(Refer to Lubrication System - "Oil Pan") |
5. |
After assembly, wait at least 30 minutes before filling the engine with oil. |
Front Door Trim Components and Components Location
Component Location
1. Front door trim
...
Manifold Absolute Pressure Sensor (MAPS) Description and Operation
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density
type sensor and is installed on the surge tank. It senses absolute
pressure of the surge tank and transfers the analog si ...
Room lamp
Press the button to turn the light on or off.
CAUTION
Do not leave the lamp switches on for an extended period of time when the
vehicle is not running. ...