Removal |
1. |
Turn the ignition switch OFF, and then remove battery (-) cable. |
2. |
Remove the fuel tank.
|
3. |
Disconnect the vapor hose (A). |
4. |
Remove installation bolts (B), and then remove the ORVR valve (C) from the fuel tank, |
Inspection |
1. |
Visually check if the valve and gasket seal are deformed or damaged. |
2. |
Check if the air is passed smoothly when blowing into the nipple of ORVR valve as below position. |
3. |
Check if there is resistance when blowing into the nipple of ORVR valve as below position. |
Installation |
1. |
Installation is reverse of removal. |
EBD(Electronic Brake-force Distribution) Description and Operation
Operation
The EBD system (Electronic Brake force Distribution) as a
sub-system of the ABS system is to control the maximum braking
effectiveness by the rear wheels.
It further utilizes the e ...
Intake Actuator Repair procedures
Inspection
1.
Ignition "OFF".
2.
Disconnect the intake actuator connector.
3.
Verify that the actuator operates to the recirculation position when connecting 12V to the terminal 3 and grou ...
Anti-lock brake system (ABS)
ABS (or ESC) will not prevent accidents due to improper or dangerous driving
maneuvers. Even though vehicle control is improved during emergency braking, always
maintain a safe distance between you ...