Hyundai Azera: Parking Brake System

Brake Switch Repair procedures

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the lower crash pad. (Refer to the Body - "Crash Pad") 3. Disconnect the stop lamp switch con ...

Components and Components Location

Components (1) 1. Parking brake pedal2. Parking brake cable3. Equalizer assembly Components (2) 1. Backing plate2. Operating lever3. Upper spring4. Lower spring5. Adjuster6. Shoe hold down ...

See also:

Accelerator Position Sensor (APS) Description and Operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors ...

Camshaft Components and Components Location
Components 1. RH exhaust camshaft2. RH intake camshaft3. LH intake camshaft4. LH exhaust camshaft ...

ICM (Integrated Circuit Module) Relay Box Repair procedures
Inspection Two Turn Unlock Relay Check for continuity between the terminals. 1. There should be continuity between the No.18 and No.17 terminals when power and ground are connected to the No. ...