Components |
TPMS Sensor Repair procedures
Removal
1.
Remove the tire.
(Refer to Tires/Wheels - "Tire")
2.
Remove the valve nut.
The valve nut should not be re-used.
Installation
Sensor Fit
& ...
Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). Green arrow indicators on the instrument
panel indicate which turn si ...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...